| Customization: | Available |
|---|---|
| Manufacturing Process: | Stamping |
| Surface Treatment: | No Description |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Multi-Beam Packing Support:
it is a gas injection type support plate or Random packing support grid is designed for random packed beds in towers generally greater than 900 mm (36 inches) diameter. It is designed for higher mechanical strength. The beams are made in single units that pass through a manhole. Special variants of this support plate are available to handle very tall beds. Random Packing Support Grid is also available in most metals and in thermo plastic materials. Very tall beds together with larger column diameters result in higher mechanical loads. In such cases, support plates are supported using I-beams in conjunction with a tray support ring.
Installation
1:According to the tower equipment diagram,and make sure that packing installation heights is correct.
2:When installing, it should always be poured from a certain height away from the packing layer. People should not stand directly on the packing to prevent the packing from deformation and uneven density. Wooden boards can be laid on the packing to disperse the force.
3:Other sundries, packaging bags, etc. is forbidden during the installation
4:Generally filled by random packing
5:After finished, if there is unevenness, use a wooden strip to naturally push it flat
){kind=link}