Metal Wire Gazue Structured Packing

• Customization: Available
• CAS No.: N/a
• EINECS: N/a
• Structure Feature: Structure
• Material: Metal
• Usage: Chemical Engineering, Chemical Industry Product
• Effect: Liquid Gas Full Contact
• Transport Package: Wooden Case
• Specification: 500, 700
• Trademark: FXSINO
• Origin: Jiangxi, China
• Production Capacity: 2000cbm/Month

Product Description

Product Description

Metal Wire Gauze Packing

Metal Wire Gauze structured packing consist of proprietary designed metal wire mesh with corrugated sheets which are aligned and placed vertically. The wire structures slopes are reversed in other sheets stacked with alternating 90 degree orientation of each layer resulting in inclined flow passages and a relatively high surface area. This allow thin liquid films to be continuously spread across the tower as liquid flows through the packing. Capillary action and high surface areas result in maximum exposure to high mass transfer efficiency, low pressure drop and large flow rate. TPU Gauze packing product series includes commonly used BX, CY types, generally applied in vacuum distillation, normal pressure distillation and absorption processes of matters hard to separate or thermal sensitive.
The key advantage of wire gauze structured packing is the high separation efficiency even at very small liquid loads along with its low pressure drop and small liquid hold-up, making it very suitable for distillation of thermally sensitive products.
TPU wire gauze structured packing is supplied with surface areas: 250m2/m3, 500m2/m3, 750m2/m3, 1000m2/m3, 1200m2/m3. Surface area can be customized by adjusting the corrugation height level for your special requirement.

Detailed Photos

Good lateral distribution of liquid and gas.
Highest theoretical stages per meter of packed height.
Lower specific pressure drop per theoretical stage.
Less liquid hold up. Economic operating loads.
The weir mesh packing with high number of theoretical plates and low pressure drop per meter.
Small hold-up, most economical load range: F factor 1.5-2m/s kg/m3. minimum liquid load approx: 0.2 m3/m2·h

 

Product Parameters

Model

Model	surface area  α  m^2/m^3	Heaping Weight γρ kg/m^3	Pressure drop per plate Pa/n	void space  % ε	HETP mm	F-factor m/s	Theoretical tower plate No/m	Stage height m
250(AX)	250	125	10-40	95	400-333	2.5-3.5	2.5-3	5
500(BX)	500	250	40	90	200	2.0-2.4	4-5	3-4
700(CY)	700	350	67	85	100	1.5-2.0	8-10	5

Applicaiton :

Fine Chemicals, Flavours, Isomers Separation.
The separation of thermal sensitive materials, Pilot and laboratory columns.
Reform existing columns for increased Performance.and system of ethylbenzene / benzene
second, hexamethylene kelone/ hexamethylene mellow, oneself lactam.
absorb or regeneration tower.
250(AX) Precision rectification for high productive capacity and less theoretical plate number.
500(BX) Vacuum rectification for thermo sensitive system and hard separation system, especially suitable for rectification with pressure lower than 7KPa .
700(CY) Separation of isotopic compound and isomeric compound.
Wire gauze structured packing is not suitable for fouling services and strongly corrosive media.
 

Installation Instructions

 

Company Profile

Our Advantages

FXSINO Advantage:
1:Automatic Intelligent warehouse
1.1 Allows auto handling and scanning of label info via OCR technology which integrated to Fxsino's warehouse system.
1.2 Magnetic Guidance Lurking AGV Unmanned vehicle can pick, deliver,yard all cargo to warehouse.
1.3: Connected with FXSINO EPR to fulfill warehouse process automation
1.4:Warehouse capacity is close to 80000 cbms

2:Intelligent management robot
2.1: 24 hours non-stop inspection against product's quality,package,worker's efficiency and so on .
2.2 Timely find equipment's failure and inform technical staff to repair
2.3.Face recognition technology will monitor workers working status and prevent irregularities by outsiders.

3:AR visual system+5G+MAS
3.1 Based on China Unicom mobile proxy server full coverage, Our customers can see the production status of orders in real time through AR glasses.
3.2 we can collect all data,include in product daily output, material consumption, warehouse real-time inventory, order progress and so on via 5G data platform.

4:Technical research and development capability
4.1 Through cooperation with co-partner named tianjin University,Zhejiang University of Technology,Nanchang University,Tsinghua University and so on,we can provide EPC to you. Meanwhile, to assist customers to resolve with facing problem.

 

 

FAQ

FAQ:
About US
1: Are you a manufacture or trader?
We are a professional manufacturer over 20 years
2: Do you participate in Exhibition?
Yes, Such Achema, Chemical Technology Equipment Expo, ECEE and so on
3:Where is your company? And visit?
Located in Anyuan Industry Park, Pingxiang City, Jiangxi Province.Welcome you to visit
4:Payment way
For oversea market, 30% advanced payment and 70% against copy of B/L or negotiation with you
5: After sales service
Please watch our related description
6:How long does it take to receive a reply after sending an inquiry?
24 hours. For busy, 48 hours.
7:Working time
A.M 8:00-P.M.5:00. However, for any question from internet, telephone,wechat and so on, answer you immediately
8:Third-party test?
We have our owned testing center. If you need third-party testing, we will contact with them to do it.
9: QC
Pre-sales: Material test, adopt Olympus spectrometer,material test report, third party test(necessary)
In-sales: test product material, weight, size, bulk number,pressure,Temperature resistance
After-sales:
Providing professional installation guidance and on-site guidance if necessary
If any problem, offer suitable opinion to solve.

About product
1:customized and logo?
Yes, we can do it
2:Package
Small plastic woven bag, super sack, cartons or upon your requirement
3:Certification
If necessary, we will entrust third-party to do it
4: MOQ
1 cubic meter
5:Production time
5-7 days to meet one 20 FCL container loading requirement
6:How much is the proofing fee? How long does the sample come out?
If only need 3D proofing, 5-7 days will finish after confirming drawing. If only need injected sample, 30-40 days will finish after confirming mold
7:HS code
Common customs codes is 3926909090,8419909000,6903200000,8419909000 and so on.