| Customization: | Available |
|---|---|
| Manufacturing Process: | Stamping,Cutting and Welding |
| Surface Treatment: | Polishing |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Plastic Vane Mist Eliminator Filter /Plate Drift Eliminator Demister Plastic Structured Packing:
It is is a device often fitted to vapor liquid separator vessels to enhance the removal of liquid droplets entrained in a vapor stream.It is made out of aluminum, galvanized steel and stainless steel materials. When desulfurized flue gas passing through Metal Mist Eliminator at a certain speed, flue gas will be quickly change movement way. Due to the inertia and centrifugal's driven, droplet collides with Vane and gather to form water flow. Finally, when droplet forms bigger ones,
It will fall down. The most common process design for Mist eliminator is in a vertical gas flow, but it is also possible to install Mist Eliminator in the horizontal gas flow. The choice of vanes and design is influenced by the system pressure loss, the cleanability of the mist eliminator and the risk off clogging.
Feature:
1.Minimal pressure drop loss
2.Easy installation
3.Large capacity
4.Low water consumption
High operating temperature
Packaging:
1: Round type Super sack(1000*1000*1000 mm) on Fumigation Pallet
20 super sacks is equal to one 20 GP container loading quantity
2: 100L Plastic Woven bag
10 bags is equal to one cubic meter
3: Cartons on Fumigation pallet
8 cartons is equal to one cubic meter
If you have any other requirement, do it on your requirement.
Shipping:
Once achieved Purchase with us, we will let you know our production Production plan and schedule.In case of delayed shipment, We will notify customers three days in advance.
1:All support component must be rechecked and ensure all connecting position is comply with the drawing requirement before Mist Eliminator entering into tower.
All installation must be done by skilled & trained worker. All adjustment and welding must be done by worker with a welder's certificate of competence (in accordance with DVS regulations or equivalent).
2:After hanging all modules based on Figure 1, all parts must be tighten the bolted.
3:According to the number on the mist eliminator,the mist eliminator is pre-installed in the open space
4:Lifting of all modules in sequence and fixing of the modules to each other by means of six-tooth clamps.
Founded in Pingxiang City of Jiangxi Province in 1998, mainly engaged in the design and manufacture of tower internals, packing, tower trays and the process of energy saving. Mainly develop the production, test and engineering service of mass transfer and separation in Chemical, Petrochemical, Refinery, Fertilizer, Oil & Gas and Environmental Protection areas.
With many years of technological development and production innovation, FXSINO has a very complete production equipment and strength. Widely cooperation with domestic famous Research institute & Multinational Group let FXSINO gain an unprecedented leap in the filed of production application recently.We provide our clients the best priced tower packing, trays and tower internals with good quality, practical utility and high - efficiency. Meanwhile, positively assist our customer resolve some questions which happened in project design, equipment commission, later maintenance& replacement etc.
Air Scrubbing
The process of removing unwanted pollutants from a gas stream. The scrubber uses liquid to wash unwanted pollutants from a gas stream.
Air Stripping
Air Stripping transfers volatile components of a liquid into an air stream. Air Strippers are usually packed towers operated with a countercurrent flow.
Distillation
Distillation separates a mixture into two or more products by boiling to remove the more volatile components out of the mixture.
Biofiltration
Biofiltration is a pollution control technique using living material to capture and biologically degrade process pollutants.
Degasification
Degasification is the removal of dissolved gases from liquids, especially water and aqueous solutions. A packed column may be utilized.
It is a vane type separator for vertical flow. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the profiles, where they form a liquid film which is subsequently drained off as a result of gravity.
){kind=link}