| Customization: | Available |
|---|---|
| Application: | Ceramic Decorations, Refractory, Structure Ceramic, Industrial Ceramic, Upon Your Requirement |
| Type: | Ceramic Plates |
|
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Quality Zirconia Zl-Sic Silicon Carbide Foam Ceramic Filter :
Foam filters are composed of phosphate-bonded, high-purity aluminia that gives each filter cell a high surface area. This high surface area allows the filter to attract inclusion particles much smaller than the cell itself. The reduced cell size leads to a decrease in the metal flow rate, which increases the amount of molten metal in the recommended velocity range. Cell dimensions are tightly controlled in the manufacturing process, leading to consistent filter performance. The filters are available in sizes from 17.8-66 centimetres (7-26 inches) and in filter grades of 10 to 100.
Installation and maintenance of the filters is simple and can be incorporated into any in-line process system. Alloy changes are easy to perform and there are standardized blue preheat dots on all filters. 
Appearance requirement:
No crack, No scaling-off, be wrapped by sealing cotton.
Specification requirement:
| Specification | Size | Thickness | Slant angle | Curvature | Diagonal line |
| 12 inch/305 mm | ±1 mm | 50 mm±1 mm | 17.5°±1° | 4 mm | Less than side length 1% |
| 15 inch/381 mm | ±2 mm | 50 mm±1 mm | 17.5°±1° | 4 mm | Less than side length 1% |
| 17 inch/432 mm | ±3 mm | 50 mm±1 mm | 17.5°±1° | 4 mm | Less than side length 1% |
| 20 inch/508 mm | ±4 mm | 50 mm±1 mm | 17.5°±1° | 4 mm | Less than side length 1% |
| 23 inch/584 mm | ±4 mm | 50 mm±1 mm | 17.5°±1° | 4 mm | Less than side length 1% |
Physical performance index:
| Color | White |
| Content of Alumina | ≥90% |
| Porosity | ≥85% |
| Specific gravity | 0.3 g/cm³-0.45 g/cm³ |
| Refractory temperature | ≥1800 ºC |
| Thermal stock | 750 ºC/5 time |
| Bending strength | >0.5 Mpa |
| Solubility | Never reaction with any liquor, such as chemical reaction and dissolution |
Founded in Pingxiang City of Jiangxi Province in 1998, mainly engaged in the design and manufacture of tower internals, packing, tower trays and the process of energy saving. Mainly develop the production, test and engineering service of mass transfer and separation in Chemical, Petrochemical, Refinery, Fertilizer, Oil & Gas and Environmental Protection areas.
With many years of technological development and production innovation, FXSINO has a very complete production equipment and strength. Widely cooperation with domestic famous Research institute & Multinational Group let FXSINO gain an unprecedented leap in the filed of production application recently.We provide our clients the best priced tower packing, trays and tower internals with good quality, practical utility and high - efficiency. Meanwhile, positively assist our customer resolve some questions which happened in project design, equipment commission, later maintenance& replacement etc.
){kind=link}