| CAS No.: | N/a |
|---|---|
| Formula: | Stainless Steel |
| EINECS: | N/a |
| Material: | Metal |
| Structure Feature: | Ring Form Filler |
| Type: | Random Packing |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Stainless Steel Metal Pall Ring Packing
Stainless Steel Metal Pall Ring Packing is one of the most common and well known packing, Metal Pall Ring is an industry standard design media developed from the Raschig Rings and is used widely in all variety of applications. By minimizing the number of contours and crevices that can cause liquid hold-up and potential entrainment, the Metal pall ring geometry enables high gas and liquid transfer rates. The opened cylinder walls and inward bent protrusions of the Metal pall Ring allow greater capacity and lower pressure drop than standard cylindrical rings. This open ring design also maintains an even distribution and resists wall-channeling tendencies. The interior and exterior contacting surfaces of the Metal pall ring provide for an effective distribution of liquids and gasses and resist plugging, fouling and nesting. Pall rings are available in a wide range of materials.
Capacity vs Pressure Drop
• High loading & throughput / low pressure drop;
• Good liquid / gas distribution and high mass transfer efficiency.
Versatility
• Easily wettable;
• High resistance to fouling;
• High Temperature.
Mechanical Strength
• High temperature applications;
• Mechanically robust, lesser probability of breakage, suitable for deeper beds.
Metal Pall Ring Packing is widely used in All kinds of separation, absorb plants, constant decompress plants, compounding ammonia plant, decarburization, de-sulfuration, separation of ethyl benzene, separation of isooctane/ methylbenzene, Absorption, Aeration, Degassing, Desorption, Distillation, Stripping, Heat Recovery, Extraction, Various separation and absorption applications at atmospheric pressure and under vacuum, where a low pressure drop is critical,H2S, NH3 & SO2 Absorption & Stripping, Steam Stripping, Quench towers, Direct contact cooling.
| Specification D*H*δ |
Specific surface area m2/m3 |
Num n m-3 |
Bulk Density kg/m3 |
Void ε m3/m3 |
|
| 3/8" | Φ10xH10x0.3mm | 482 | 768000 | 527 | 92.7 |
| 5/8 " | φ16xH16x0.3mm | 338 | 214000 | 379 | 93.1 |
| 1 " | φ25xH25x0.3mm | 218 | 52000 | 223 | 94.8 |
| 1.5 " | φ38xH38x0.4mm | 141 | 15200 | 203 | 96.08 |
| 2 " | φ50xH50x0.5mm | 107 | 6500 | 199 | 95.9 |
| 3 " | Φ76xH76x0.6mm | 74 | 1830 | 150 | 97 |
| 3.5" | Φ89xH89x0.7mm | 65 | 1200 | 161 | 98 |
Installation
1:According to the tower equipment diagram,and make sure that packing installation heights is correct.
2:When installing, it should always be poured from a certain height away from the packing layer. People should not stand directly on the packing to prevent the packing from deformation and uneven density. Wooden boards can be laid on the packing to disperse the force.
3:Other sundries, packaging bags, etc. is forbidden during the installation
4:Generally filled by random packing
5:After finished, if there is unevenness, use a wooden strip to naturally push it flat
About US
1: Are you a manufacture or trader?
We are a professional manufacturer over 20 years
2: Do you participate in Exhibition?
Yes, Such Achema, Chemical Technology Equipment Expo, ECEE and so on
3:Where is your company? And visit?
Located in Anyuan Industry Park, Pingxiang City, Jiangxi Province.Welcome you to visit
4:Payment way
For oversea market, 30% advanced payment and 70% against copy of B/L or negotiation with you
5: After sales service
Please watch our related description
6:How long does it take to receive a reply after sending an inquiry?
24 hours. For busy, 48 hours.
7:Working time
A.M 8:00-P.M.5:00. However, for any question from internet, telephone,wechat and so on, answer you immediately.
8:Third-party test?
We have our owned testing center. If you need third-party testing, we will contact with them to do it.
9: QC
Pre-sales: Material test, adopt Olympus spectrometer,material test report, third party test(necessary)
In-sales: test product material, weight, size, bulk number,pressure,Temperature resistance
After-sales:
Providing professional installation guidance and on-site guidance if necessary
If any problem, offer suitable opinion to solve.
About product
1:customized and logo?
Yes, we can do it
2:Package
Small plastic woven bag, super sack, cartons or upon your requirement
3:Certification
If necessary, we will entrust third-party to do it
4: MOQ
1 cubic meter
5:Production time
5-7 days to meet one 20 FCL container loading requirement
6:How much is the proofing fee? How long does the sample come out?
If only need 3D proofing, 5-7 days will finish after confirming drawing. If only need injected sample, 30-40 days will finish after confirming mold
7:HS code
Common customs codes is 3926909090,8419909000,6903200000,8419909000 and so on.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}