Wet Scrubbers Media Tske Tellerette Rosette Ring

• CAS No.: 9003-07-0
• Formula: Polypropylene
• EINECS: 200-815-3
• Material: Plastic
• Structure Feature: Controlled Interlock Ring
• Type: Random Packing
• Model NO.: FXP-DB201107-D1
• Usage: Chemical Engineering, Chemical Industry Product, Sewage Treatment, Wet Scrubbers, Cooling Towers, Mist Eliminators, a
• Effect: Enhance Gas-Liquid Contact Efficiency
• Source: No Description
• Process: Injection
• Sample: Free
• Brand: Fxsino
• Standard: Hg/T 3986-2007
• Transport Package: Small Bag, Super Sack Carton and So on
• Specification: 25-145 mm
• Trademark: FXSINO
• Origin: China
• HS Code: 3926909090
• Production Capacity: 3000 Cbm/Month

Product Description

Product Description

Wet Scrubbers Media TSKE Tellerette Rosette Ring :
Tellerette Tower Packing helps control your environment and boasts a toroidal helix design that makes it dramatically more efficient than conventional packing material for mass transfer, heat transfer, and particulate collection. scrubber systems are designed with Tellerette Tower Packing to increase residence time in the scrubber and improve removal efficiency. A shallow bed of Tellerette packing can also be used to provide effective mist elimination.

Feature:
Lower mass transfer unit height, permitting shorter packed beds
Greater gas flow capacity, which permits use of smaller diameter, lower cost columns
Lower pressure drop to reduce operating costs
High open area design for minimal fouling
High column stability - no classic flooding
Effective impingement of both liquid droplets and solid particulate
No channeling with proper liquid distribution

 

This structure's feature in not only increase gas & liquid contacting point and area, but also largely improve gas & liquid separation performance. It is an excellent packing apply in Odor control, air stripping
 

Tellerette packing can be operated at capacities up to the phase inversion point. Because of their open filamentous configuration, phase inversion in a Tellerette packed column can be reversed by simply reducing either the gas or liquid flow. The tower dose not have to be shut down and restarted.

 

D×H×δ mm	Specific area m^2/m^3	Void rate %	Bulk number Pieces/m³	Bulk density Kg/m³
25×9×(1.5×2)	269	0.82	170000	103
47×19×(3×3)	185	0.88	32500	88
51×19×(3×3)	180	0.89	25000	75
73×28×(3×4)	127	0.89	8000	80
95×37×(3×6)	94	0.90	3600	53
145×48×(3×6)	65	0.95	1100	55

TKSE(Japanese) teller rosette ring technical parameter:

Type	Outsider Diameter  mm	Height mm	Num. Of filling Pieces/m3	Surface area m2/m3	Void %	Weight Kg/m3
S-O	47	19	32500	185	88	104
S	51	19	25000	180	89	100
S-II	59	19	17500	150	92	72
M	73	27.5	8000	127	89	92
L	95	37	3600	94	90	77
L-II	145	48	1100	100	93	68

Ceilcote Teller rosette Ring Technical Parameter:

Type	Size mm	Surface area Ft2/ft3	Void %	Packing factor	Pieces/m3
2-K	82.5	28	95	11	5830
3K	105	31	96	9	1910

Material:
High-Density Polyethylene (HDPE)
Polypropylene (PP)
Glass-Filled Polypropylene
Kynar^® (PVDF)
Xydar^® (LCP)
Select style available in Chlorinated Polyvinyl Chloride (CPVC)
Additional engineered polymers available upon request

Certifications

                      OHSAS 18001:2017                                                   ISO 14001:2015                                                   ISO 9001:2015

Packaging & Shipping

Packaging:
1: Round type Super sack(1000*1000*1000 mm) on Fumigation Pallet
20 super sacks is equal to one 20 GP container loading quantity
2: 100L Plastic Woven bag
10 bags is equal to one cubic meter
3: Cartons on Fumigation pallet
8 cartons is equal to one cubic meter
If you have any other requirement, do it on your requirement.

Shipping:
Once achieved Purchase with us, we will let you know our production Production plan and schedule.In case of delayed shipment, We will notify customers three days in advance.
 

Installation Instructions

1:According to the tower equipment diagram,and make sure that packing installation heights is correct.
2:When installing, it should always be poured from a certain height away from the packing layer. People should not stand directly on the packing to prevent the packing from deformation and uneven density. Wooden boards can be laid on the packing to disperse the force.
3:Other sundries, packaging bags, etc. is forbidden during the installation
4:Generally filled by random packing
5:After finished, if there is unevenness, use a wooden strip to naturally push it flat

 

 

Company Profile

Founded in Pingxiang City of Jiangxi Province in 1998, mainly engaged in the design and manufacture of tower internals, packing, tower trays and the process of energy saving. Mainly develop the production, test and engineering service of mass transfer and separation in Chemical, Petrochemical, Refinery, Fertilizer, Oil & Gas and Environmental Protection areas.
With many years of technological development and production innovation, FXSINO has a very complete production equipment and strength. Widely cooperation with domestic famous Research institute & Multinational Group let FXSINO gain an unprecedented leap in the filed of production application recently.We provide our clients the best priced tower packing, trays and tower internals with good quality, practical utility and high - efficiency. Meanwhile, positively assist our customer resolve some questions which happened in project design, equipment commission, later maintenance& replacement etc.

 

 

After Sales Service

1:Pre-purchase service
Fully understand customer's requirement, and give our professional opinion to help them.

2:User Training
Owing to our product has many different type, so it has many different installation way. For each type product, we must let you know its basically installation way. If necessary, issue one installation manual to them.

3:Warranty services
So called"Warranty services" is repairing replacement of selected parts for a selected period of time. For the first year, the customers are provided with free replacement or repairing of the device for any problem except for Abnormal use environment. For EPC project, we will issue our warranty booklet to our customer for each components. As for unmentioned, we will negotiated with our customer about warranty range and period

4:Online support
24 hours online service. For different problems, we will find related staff to solve with your problem timely.

5:Return and Replacement
In the warranty period, we provide free replacement of the product in case of any queries. Of course, if customers does not agree, we will refund after reduce some fees related with this deal.

6:Outsourcing and guiding installation
For customer's different requirement, Under achieving related fees payed standard(such as worker daily install fees,board and lodging and so on),we can send our installation team to help customer to install product installation. Of course, if you do not need our installation, we also send our engineer to guide how to install. So you would pay for the guiding fees.

FAQ

About US
1: Are you a manufacture or trader?
We are a professional manufacturer over 20 years
2: Do you participate in Exhibition?
Yes, Such Achema, Chemical Technology Equipment Expo, ECEE and so on
3:Where is your company? And visit?
Located in Anyuan Industry Park, Pingxiang City, Jiangxi Province.Welcome you to visit
4:Payment way
For oversea market, 30% advanced payment and 70% against copy of B/L or negotiation with you
5: After sales service
Please watch our related description
6:How long does it take to receive a reply after sending an inquiry?
24 hours. For busy, 48 hours.
7:Working time ?
AM 8:00-P.M.5:00. However, for any question from internet, telephone,wechat and so on, answer you immediately.
8:Third-party test?
We have our owned testing center. If you need third-party testing, we will contact with them to do it.
9: QC
Pre-sales: Material test, adopt Olympus spectrometer,material test report, third party test(necessary)
In-sales: test product material, weight, size, bulk number,pressure,Temperature resistance
After-sales:
Providing professional installation guidance and on-site guidance if necessary
If any problem, offer suitable opinion to solve.

About product
1:customized and logo?
Yes, we can do it
2:Package
Small plastic woven bag, super sack, cartons or upon your requirement
3:Certification
If necessary, we will entrust third-party to do it
4: MOQ
1 cubic meter
5:Production time
5-7 days to meet one 20 FCL container loading requirement
6:How much is the proofing fee? How long does the sample come out?
If only need 3D proofing, 5-7 days will finish after confirming drawing. If only need injected sample, 30-40 days will finish after confirming mold
7:HS code
Common customs codes is 3926909090,7326909090 and so on.