| Customization: | Available |
|---|---|
| CAS No.: | 9003 |
| Structure Feature: | Teller Rosetter |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Teller rosette ring:
Teller rosette ring is made by 12 small rings, which invented by American Teller A J in 1956,like a ball surrounded by helical springs which are connected by end to end.Due to the structure of polycyclic enabling, it will enlarge gas & liquid contacting area and prolong liquid retention time.Therefore, it was recognized a ideal packing in Gas washing,purification tower.
Advantages
1. Greater gas flow capacity-allows you to use smaller diameter, lower cost columns
2. Ideal for retrofitting existing towers to boost capacity and efficiency
3. Lower pressure drop to reduce operating costs
4. High open area design for minimal fouling
5. High column stability-no classic flooding
6. Effective impingement of both liquid droplets and solid particulate
7. No channeling with proper liquid distribution
| D×H×δ mm |
Specific area m2/m3 | Void rate % |
Bulk number Pieces/m³ |
Bulk density Kg/m³ |
| 25×9×(1.5×2) | 269 | 0.82 | 170000 | 103 |
| 47×19×(3×3) | 185 | 0.88 | 32500 | 88 |
| 51×19×(3×3) | 180 | 0.89 | 25000 | 75 |
| 73×28×(3×4) | 127 | 0.89 | 8000 | 80 |
| 95×37×(3×6) | 94 | 0.90 | 3600 | 53 |
| 145×48×(3×6) | 65 | 0.95 | 1100 | 55 |
TSKE teller rosette ring:
| Type | Outsider Diameter mm |
Height mm |
Num. Of filling Pieces/m3 |
Surface area m2/m3 |
Void % |
Weight Kg/m3 |
| S-O | 47 | 19 | 32500 | 185 | 88 | 104 |
| S | 51 | 19 | 25000 | 180 | 89 | 100 |
| S-II | 59 | 19 | 17500 | 150 | 92 | 72 |
| M | 73 | 27.5 | 8000 | 127 | 89 | 92 |
| L | 95 | 37 | 3600 | 94 | 90 | 77 |
| L-II | 145 | 48 | 1100 | 100 | 93 | 68 |
Ceilcote:
| Type | Size mm |
Surface area Ft2/ft3 |
Void % |
Packing factor | Pieces/m3 |
| 2-K | 82.5 | 28 | 95 | 11 | 5830 |
| 3K | 105 | 31 | 96 | 9 | 1910 |
Installation
1:According to the tower equipment diagram,and make sure that packing installation heights is correct.
2:When installing, it should always be poured from a certain height away from the packing layer. People should not stand directly on the packing to prevent the packing from deformation and uneven density. Wooden boards can be laid on the packing to disperse the force.
3:Other sundries, packaging bags, etc. is forbidden during the installation
4:Generally filled by random packing
5:After finished, if there is unevenness, use a wooden strip to naturally push it flat
){kind=link}