| Customization: | Available |
|---|---|
| Active Ingredient Content: | Resin |
| Application: | Automotive Industry, Electronics, Electronics Industry, Medical Industry, Packaging Industry, Separation |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Injected Type 252Y Plastic Structured Packing :
It is curve packing channel. Traditionally, when the gas and the liquid passing from one packing layer to the other in ordinary structured packing layer,it is very easy to form Secondary distribution. this secondary distribution is not only reduce vapor and liquid contacting area, but also easy to blockage in Inside the packing layer. The pressure difference of top and bottome tower is more bigger than 252 plastic structured packing. the biggest feature as follows:
1.The air flow in the adjacent packing units is slowly change the its direction.
2.Air flow under the connection position between adjacent packing unit's movment is very similar to tower axis direction, air speed will reduce 25% with compared to airflow of tower packing inside.
The above two points reduce the pressure drop and shear force, and overcome the flooding phenomenon at the joint of the packing.
3.Large number of transfer unit per meter,small pressure drop
4.Max operation temperature is 90-150 degree.
| Model | piece/m | Specific area m 2/m 3 |
Void volume m 3/m 3 |
P per plate Mpa/m |
Bulk density kg/m 3 |
max F factor m/s(Kg/m 3) 0.5 |
m 3/m 2.hr |
| 125Y | 1-2 | 125 | 0.98 | 2*10 -4 | 37.5 | 3 | 0.20-100 |
| 250Y | 2-2.5 | 250 | 0.97 | 3*10 -4 | 75 | 2.6 | 0.20-100 |
| 350Y | 3.5-4 | 350 | 0.94 | 2*10 -4 | 105 | 2 | 0.20-100 |
| 500Y | 4-4.5 | 500 | 0.92 | 3*10 -4 | 150 | 1.8 | 0.20-100 |
| 125X | 0.8-1.9 | 125 | 0.98 | 1.4*10 -4 | 37.5 | 3.5 | 0.20-100 |
| 250X | 1.5-2 | 250 | 0.97 | 1.8*10 -4 | 75 | 2.8 | 0.20-100 |
| 350Y | 2.3-2.8 | 350 | 0.94 | 1.3*10 -4 | 105 | 2.2 | 0.20-100 |
| 500X | 2.8-3.2 | 500 | 0.92 | 1.8*10 -4 | 150 | 2 | 0.20-100 |
To compared with traditional plastic structured packing, the advantage as follows:
1:Increased strength and endurance
2:Not easily deformed
3:The flow channel is more smooth, and will not be deformed by external force
4:The buckle design ensures the firmness and stability of the product
Application:
Typical Application field for random packing are flue gas scrubbers,strippers,pre-coolers in air separation plants or amine scrubbers for CO2 Separation from flue gases as well as heat recovery scrubbers.
Installation
1:According to the tower equipment diagram,and make sure that packing installation heights is correct.
2:When installing, it should always be poured from a certain height away from the packing layer. People should not stand directly on the packing to prevent the packing from deformation and uneven density. Wooden boards can be laid on the packing to disperse the force.
3:Other sundries, packaging bags, etc. is forbidden during the installation
4:Generally filled by random packing
5:After finished, if there is unevenness, use a wooden strip to naturally push it flat
FXSINO:
Founded in Pingxiang City of Jiangxi Province in 1998, mainly engaged in the design and manufacture of tower internals, packing, tower trays and the process of energy saving. Mainly develop the production, test and engineering service of mass transfer and separation in Chemical, Petrochemical, Refinery, Fertilizer, Oil & Gas and Environmental Protection areas.
With many years of technological development and production innovation, FXSINO has a very complete production equipment and strength. Widely cooperation with domestic famous Research institute & Multinational Group let FXSINO gain an unprecedented leap in the filed of production application recently.We provide our clients the best priced tower packing, trays and tower internals with good quality, practical utility and high - efficiency. Meanwhile, positively assist our customer resolve some questions which happened in project design, equipment commission, later maintenance& replacement etc.
After sales service
1:Pre-purchase service
Fully understand customer's requirement, and give our professional opinion to help them.
2:User Training
Owing to our product has many different type, so it has many different installation way. For each type product, we must let you know its basically installation way. If necessary, issue one installation manual to them.
){kind=link}