Plastic Maspac

• Customization: Available
• CAS No.: 9003-07-0
• Color: White
• Model NO.: FXP-2450622DB-B01
• EINECS: 200-815-3
• Formula: Polypropylene
• Process: Injection
• Sample: Free
• OEM/ODM: Available
• Certification: ISO 9001:2018
• After-Sales Service: Any Questions Will Be Settled Within 3 Days
• Preservation Condition: 5-40ºC, Avoid Direct Sunlight
• Material: Plastic
• Structure Feature: Ring Form Filler
• Type: Random Packing
• Usage: Chemical Engineering, Chemical Industry Product, Sewage Treatment, Upon Your Requirement
• Effect: Improve Transfer Efficiency
• Source: No Description
• Transport Package: Super Sack, Small Bag or Carton
• Specification: 25.38.50.76 mm
• Trademark: FXSINO
• Origin: China
• HS Code: 3926909090
• Production Capacity: 3000/Month

Product Description

Product Description

Random packing Plastic Haier ring:
Plastic Haier ring also called Heilex ring, crown-type raschig ring and on on. It is a new type of Perforated Packing.Wavy gas-liquid interface enlarges liquid's contacting area and also improve gas-liquid flow efficiency. Meanwhile, Plastic Heilex ring interlacing cone type vertical structure can largely reduce towers' packing nesting, wall flow and unevenly distribution.
Especially in Directioned guide bar setting on wavy surface,it will speed up the liquid polymerization and liquid film renewal.Therefore, Plasitc Heilex Ring performance is very out-understanding in gas absorption, cooling and gas purification processes

Product Parameters

 

Type/	Size/ mm	Weight/ PP as a standard/PP	pcs/m³	Surface area / m²/m³	Void ratio/ %	Packing Factor/ 1/m
125	32	90	35000	260	90	210
175	44	88	12300	186	92	120
200	50	75	7500	100	93	70
300	76	46	1850	75	95	46
350	90	75	1150	100	92	54
500	127	45	450	52	95	40

The above are Japanese products'parameter 
 

D×H×δ mm	Specific area m^2/m^3	Void rate %	Bulk number Pieces/m³	Bulk density Kg/m³
50×50	107	0.93	8200	50
76×76	75	0.94	3420	45
100×100	55	0.95	1850	48

The above are Domestic products'parameter 

Detailed Photos

 

Feature:
1:Impact resistance and chemical stability.
2:Low wall flow effect and uniform liquid and gas distribution.
3:Large fux and low pressure drop.
4:High flooding volocity and high mass transfer efficiency

 

Installation Instructions

General Information:
There are many ways to install random packing. Installation procedures vary depending on the column diameter, size of packing, packed bed height, and position of other internals. For small diameter columns of less than 30 inches, it is usually easier to load through lower level manways or use a chute to lower the packing to the support level. For larger columns, it may be possible to place men inside so that complete boxes or bags can be lowered and manually dumped. Extreme caution should be used in this procedure to make sure that the packing support is designed to hold the combined load of the workman and the packing. Another method is to attach a rope on the top of a bucket and another on the bottom and lower the packing to the desired level. The rope attached to the bottom would then be used to tip the bucket over. Finish all welding or other work that produces hot sparks before installing any packing. Test the dimensional compatibility of the individual packing pieces with the openings in the support grid. Make sure that it is not possible for packing to squeeze through any openings.

Our Advantages

Application

Typical Application:
1:mainly used in volatile gas stripping, water degasifying and scrubbing atmospheric pollutants from waste gas.
2: used in Gas Absorption, Acidic gas desorption system, Washing, Fertilizer Production.
3: provides high flooding and minimizes pressure drop while retaining a large surface area to maximize gas-liquid contact.
4: very easy to install without risking damage to the tower.
5: very convenient for cleaning, reducing downtime when maintenance is required.