| Customization: | Available |
|---|---|
| CAS No.: | 9003-07-0 |
| EINECS: | 200-815-3 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
plastic pore plate cockles packing:
Metal Raschig Cross flow Grid structured packing is manufactured by welding profile-shaped plastic foils onto each other. Two aspects are important: Even liquid distribution from the structure of the whole packingThe profile-shaped foils as well as the structure reached by the inclination of the foils towards each other (channel inclination) achieve an even liquid distribution throughout the packing for low up to very high liquid loads.
High rate of mass transfer by profile-shaped foilsThe wave-like profiles (inner structure) of the single foils assure a continuous thorough mixing of gas and liquid. This constant renewal of the gas/liquid boundary results in high mass transfer rates.
| Type | Theoretical Plate Number | Specific Surface | Free Volume | Pressure Drop | Bulk Density | Liquid Loading | Max F Factor |
| m-1 | m²/m³ | m³/m³ | MPa/m³ | kg/m³ | m³/m².hn | m/s(Kg/m³)0.5 | |
| SB-125Y | 1-2 | 125 | 0.985 | 2 * 10(- 4) | 37.5 | 0.2-100 | 3 |
| SB-250Y | 2-2.5 | 250 | 0.97 | 3 * 10(- 4) | 75 | 0.2-100 | 2.6 |
| SB-350Y | 3.5-4 | 350 | 0.95 | 2 * 10(- 4) | 105 | 0.2-100 | 2 |
| SB-500Y | 4-4.5 | 500 | 0.93 | 3 * 10(- 4) | 150 | 0.2-100 | 1.8 |
| SB-125X | 0.8-0.9 | 125 | 0.985 | 1.4 * 10 (- 4) | 37.5 | 0.2-100 | 3.5 |
| SB-250X | 1.5-2 | 250 | 0.97 | 1.8 * 10 (- 4) | 75 | 0.2-100 | 2.8 |
| SB-350X | 2.3-2.8 | 350 | 0.95 | 1.3 * 10 (- 4) | 105 | 0.2-100 | 2.2 |
| SB-500X | 2.8-3.2 | 500 | 0.93 | 1.8 * 10 (- 4) | 150 | 0.2-100 | 2 |
| Property //Material | PE | PP | RPP | PVC | CPVC | PVDF |
| Density g/cm3 | 0.94-0.96 | 0.89-0.91 | 0.93-0.94 | 1.32-1.44 | 1.50-1.54 | 1.75-1.78 |
| Application temperature°c | 90 | >100 | >120 | >60 | >90 | >150 |
| Chemical corrosion resistance | good | good | good | good | good | good |
| Compression Strength | >6.0 | >6.5 | >7.0 | >6.0 | >8.0 | >10.0 |
1:According to the tower equipment diagram,and make sure that packing installation heights is correct.
2:When installing, it should always be poured from a certain height away from the packing layer. People should not stand directly on the packing to prevent the packing from deformation and uneven density. Wooden boards can be laid on the packing to disperse the force.
3:Other sundries, packaging bags, etc. is forbidden during the installation
4:Generally filled by random packing
5:After finished, if there is unevenness, use a wooden strip to naturally push it flat
As the characteristics of high capacity, low pressure drop, large specific surface area, plastic perforated plate corrugated packings can be used in sewage treatment, CO2 removal, desulfurization, water tower, gas, iron and steel desulfurization, coking, chemical industry, chemical fertilizer in all kinds of ammonia washing tower filling material.
){kind=link}