Heat Excharger Ceramic Structured Packing

• Customization: Available
• CAS No.: N/a
• EINECS: N/a
• Structure Feature: Structured
• Material: Ceramic
• Type: Structured Packing
• Usage: Chemical Engineering, Chemical Industry Product
• Effect: Liquid Gas Full Contact
• Transport Package: Cartons
• Specification: 125, 250, 350, 450, 500Y
• Trademark: FXSINO
• Origin: Jiangxi, China
• Production Capacity: 2000cbm/Month

Product Description

 

Product Description

Ceramic Corrugated Structured Packing

• Corrugated sheets placed in parallel form cylindrical units
• Form of highly efficient with separating efficiency several times higher than that of loose packing
• Low-pressure drop, increased operating elasticity, minimum amplifying effect and maximum liquid treatment compared to loose tower packing
• High capacity
• New tower design may reduce diameter, while renovate old towers may increase capacity significantly
• Rectifying and absorbing some corrosive mixtures, which are definitely regulated in pressure drop and theoretic plate number

Examples of successful application:

1. Chloroacetic acid / Dichloroacetic acid / acetic acid / acetic anhydride separation at room's temperature 140 degrees.

2. Vacuum to or below 1 mbar, separation of aromatic chlorides, esters, hydrocarbons and other highly temperature sensitive material isomers.

3.  Regeneration of organic solvent  of pollution of HCl / sulfate / nitrate / three hydride / hydrogen bromide / bromine and etc.

chemical component

Component	SiO2	Al2O3	Fe2O3	CaO	MgO	K2O+Na2O	TiO2	Burning loss
Content	68-75	21-25	≤0.5	≤1.0	≤1.0	≤3.9	≤0.05	≤5.0
Test method standard		QB/T2578-2002

Items	Index	Items	Indec
Acid resistance	≥99.9%	Thermal deformation temperature	1350ºC
Alkali resistance	≥90%	Water Absorption	<0.5%
Density	2.35-2.5 g/cm^3	Material compressive strength	≥130MPa
Pressure density	≥20kg/cm^2	refractoriness under load	1280ºC(0.2MPa)
Moh's hardness	≥7	operating temperature	-30-1000ºC
test method standard	HG/T3210-2002,GB/T7322-2007,GB/T4738.2-84

 

Detailed description of each type of product

1. 700Y,500Y

The filler has low resistance, high efficiency, large separation capacity, and can replace other fillers or partial plate towers under certain conditions.

Product Features:
a. Large specific surface area and large porosity;
b. The gas phase passage has a small inclination angle, regularity and pressure reduction;
c. Radial diffusion is good and gas contact is sufficient.

Applicable occasions:
500Y (X): vacuum rectification which is heat sensitive and difficult to separate, especially vacuum distillation with a pressure less than 7 KPa, atmospheric distillation.
700Y (X): separation of isotopic mixtures, isomeric mixtures.

2. 450Y,450X

It is used for precision fractionation with high requirements on the mass transfer efficiency of the tower. It is especially suitable for chemical production processes such as acetic acid, methanol and styrene, and separation of high-purity fine chemical products. The adaptation conditions are roughly as follows:
Gas phase load factor, F=1.5~3(m/s)[Kg.m3]1/2
Minimum liquid load, L (spray density) ≥ 2m3 / m2.h

3. 350Y,300Y,250Y

The product combines the two main properties of pressure drop and efficiency in the mass transfer process. Especially suitable for atmospheric pressure in the refining process.
Distillation and low pressure fractionation columns, such as catalytic cracking, catalytic cracking, hydrocracking, hydrorefining, coking, catalytic reforming, etc. Separation of products in light hydrocarbon processing such as MTBE, isomerization, alkylation, gas fractionation, etc. The product separation of the device is also applicable to the separation of chemical products such as ethylbenzene and styrene and the absorption tower of sulfuric acid, nitric acid and hydrochloric acid. Mass transfer efficiency can reach 2-4 theoretical plates / m packing, pressure drop 1-5mmhg / m filler.

Detailed Photos

 

Product Parameters

 

Type	Surface area m^2/m^3	Void  %	Bulk density kg/m^3	hydraulic diameter mm	theoretical plates 1/m	angle of inclination °	Max.F-factor m/s.(kg/m^3)^0.5	Pressure drop mmHg
700Y	700	72	650-680	5	5	45	2.3	4.8
500Y	500	75	600-650	7.5	7	45	2.1	4.6
450Y	450	75	520-550	7	4	45	1.8-2.0	4.5
400Y	400	76	500-520	8	2.8-3.2	45	2.0-2.2	3.5
350Y	350	78	480-520	10	3-4	45	2.2-2.6	2.5
250Y	250	82	420-450	11.0±0.5	2.5-2.8	45	2.6-2.8	2.5
160Y	160	86	350-380	15.0±0.5	2	45	2.8-3.0	2.8
125Y	125	87	300-350	28.0±0.5	1.7	45	3.0-3.2	3

 

chemical component

Component	SiO2	Al2O3	Fe2O3	CaO	MgO	K2O+Na2O	TiO2	Burning loss
Content	68-75	21-25	≤0.5	≤1.0	≤1.0	≤3.9	≤0.05	≤5.0
Test method standard		QB/T2578-2002

 

Items	Index	Items	Indec
Acid resistance	≥99.9%	Thermal deformation temperature	1350ºC
Alkali resistance	≥90%	Water Absorption	<0.5%
Density	2.35-2.5 g/cm^3	Material compressive strength	≥130MPa
Pressure density	≥20kg/cm^2	refractoriness under load	1280ºC(0.2MPa)
Moh's hardness	≥7	operating temperature	-30-1000ºC

 

Company Profile

FXSINO:
Founded in Pingxiang City of Jiangxi Province in 1998, mainly engaged in the design and manufacture of tower internals, packing, tower trays and the process of energy saving. Mainly develop the production, test and engineering service of mass transfer and separation in Chemical, Petrochemical, Refinery, Fertilizer, Oil & Gas and Environmental Protection areas.
With many years of technological development and production innovation, FXSINO has a very complete production equipment and strength. Widely cooperation with domestic famous Research institute & Multinational Group let FXSINO gain an unprecedented leap in the filed of production application recently.We provide our clients the best priced tower packing, trays and tower internals with good quality, practical utility and high - efficiency. Meanwhile, positively assist our customer resolve some questions which happened in project design, equipment commission, later maintenance& replacement etc.
 

Our Advantages

 

After Sales Service

After sales service
1:Pre-purchase service
Fully understand customer's requirement, and give our professional opinion to help them.

2:User Training
Owing to our product has many different type, so it has many different installation way. For each type product, we must let you know its basically installation way. If necessary, issue one installation manual to them.

3:Warranty services
So called"Warranty services" is repairing replacement of selected parts for a selected period of time. For the first year, the customers are provided with free replacement or repairing of the device for any problem except for Abnormal use environment. For EPC project, we will issue our warranty booklet to our customer for each components. As for unmentioned, we will negotiated with our customer about warranty range and period

4:Online support
24 hours online service. For different problems, we will find related staff to solve with your problem timely.

5:Return and Replacement
In the warranty period, we provide free replacement of the product in case of any queries. Of course, if customers does not agree, we will refund after reduce some fees related with this deal.

6:Outsourcing and guiding installation
For customer's different requirement, Under achieving related fees payed standard(such as worker daily install fees,board and lodging and so on),we can send our installation team to help customer to install product installation. Of course, if you do not need our installation, we also send our engineer to guide how to install. So you would pay for the guiding fees.

FAQ