Open and Cross-Linked Design Plastic Pall Ring

• Customization: Available
• CAS No.: 9003-07-0
• EINECS: 200-815-3
• Model NO.: FXP-200331-B1
• Formula: Polypropylene
• Process: Injection
• Sample: Free
• Brand: Fxsino
• Feature: Hold-up and Two-Phase Contact
• Structure: Open and Cross-Linked Design
• Working Temperature: 140 Degree
• Cold-Resistant: -10ºC
• Material: Plastic
• Type: Random Packing
• Usage: Chemical Engineering, Chemical Industry Product, Sewage Treatment, Separation
• Source: No Dfescription
• Structure Feature: Cylindrical Hollow Body
• Effect: Absorption, Scrubbing, and Stripping Services
• Transport Package: Small Bag, Super Sack, Carton and So on
• Specification: 16.25, 38, 50.76, 100, 150.300 mm
• Trademark: FXSINO
• Origin: China
• HS Code: 3926909090
• Production Capacity: 5000 Cbm/Month

Product Description

Product Description

Open and cross-linked design plastic pall ring :
Pall Ring is a proven design that provides higher capacity and lower pressure drop than trays and other random packings.

By minimizing the number of contours and crevices that can cause liquid hold-up and potential entrainment, the pall ring geometry enables high gas and liquid transfer rates. The opened cylinder walls and inward bent protrusions of the Pall Ring allow greater capacity and lower pressure drop than standard cylindrical rings.

This open ring design also maintains an even distribution and resists wall-channeling tendencies. The interior and exterior contacting surfaces of the pall ring provide for an effective distribution of liquids and gasses and resist plugging, fouling and nesting. Pall rings are available from our stocked inventory in a wide range of materials.

Detailed Photos

Hold-up and Two-phase Contact
Promotes highly efficient two-phase contact and distribution;
A relatively high liquid hold-up promotes high absorption efficiencies, especially in cases where 
the reaction rates are slow;
Uninterrupted and consistent passages for gas and liquid flow.
Versatility
Open, cross-linked design provides a highly efficient used of the ring's surface area;
Robust to variations in liquid and vapour distribution.
Mechanical Strength
Its internal cross-structure of diametrical spars make it mechanically robust and suitable for use in deep packed beds.

Materials:
Plastic tower packings are made of heat resistant and chemical corrosion resistant plastics, including Polyethylene (PE), Polypropylene (PP), Reinforced Polypropylene(RPP), Polyvinyl Chloride(PVC), Chloridized Polyvinyl chloride(CPVC) and Polyvinylidene Fluoride (PVDF).
 

Product Parameters

D×H×δ mm	Specific area m^2/m^3	Void rate %	Bulk number Pieces/m³	Package density Kg/m³	F factor m^-1
16×16×1	188	0.91	170000	141	275
25×25×1.2	175	0.90	53500	82	239
38×38×1.4	115	0.89	15800	54	220
50×50×1.5	93	0.90	6500	56	127
76×76×2.6	73.2	0.92	1927	58	94
100×100×3.0	52.8	0.94	1000	50	82

Company Profile

As the first domestic enterprise whom fully achieved Industry 4.0 Production layout and "5G+RAID+AGV+MEC+WMS"Intelligent Management in mass transfer field,Aite Covered area is over 35000 SQM, which owned fully automatic injection workshop,the R&D center integrating  design, processing and maintenance,Centralized and integrated metal stamping workshop,assembled type tower Internals workshop,Experimental simulation device and so on. Those equipments have made Aite a leading company in the industry, also attracted Tianjin University,Zhejiang University,East China University of Science and Technology,Zhejiang University of Technology,Zhongtai Chemical's research institute technical support.

Relying on many years development and powerful equipment & techincal support, FXSINO established  Suzhou Kaient Environmental Engineering Co., Ltd., WuXi Bazhen Machinery Co., Ltd,Tianjin Tianyuan Technology Co., Ltd.Jinta Group's Aite Metal structured packing branch,Xiangdong Ceramic Branch,Pingxiang Fxsino Petrochemical Packing Co., Ltd.one after another.Mainly developed in mass transfer product,tower internals, wastewater treatment filler,VOCS series,cooling tower filler, random & structured packing, EPC project and on. Furthermore, owned 2 international patents and 5 Chinese patents on the development journey.

Most products are widely used in chemical industry, chemical fertilizer industry, coking industry, chlor-alkali industry, salinization, electric power, environmental protection, oil refining, coal to liquid, pharmaceutical, fire protection etc.Annual Output is over 300000 cbm.Output value is about RMB 300,000,000.00


 

Our Advantages

After Sales Service

 

Application

Typical Application:
1. For aerobic or anaerobic biological treatment of wastewater.
2. Aerobic trickling filters at sewage treatment Plants capacity and efficiency by replacement of existing rock beds.
3. Anaerobic treatment in a submerged filter can generate methane gas, which is a complementary byproduct in an energy- hungry environment.
4. Gas phase bio-filter