Customization: | Available |
---|---|
Manufacturing Process: | Injection |
Surface Treatment: | No Description |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Biotrickling Filter media HD-Q/pac:
In a typical oil-water separator with traditional media, incoming oily water slowly flows from the inlet through a media comprised of a series of parallel, inclined plates. As the oil droplets in the water coalesce with other oil droplets on the media surface, the oil droplets grow in size and travel up the plates to the water surface. This design, however, allows some water droplets to by-pass the plates and flow through the separator, requiring secondary polishing filters to achieve the required effluent characteristics. The shapes and configurations of tradition coalescing media also traps particles and sludge on the media itself, resulting in a sludge build-up and a reduction of effective flow through the separator.
The HD Q-PAC media provides improved performance in oil-water separators over traditional media due to the following properties:
- A larger amount of surface area per cubic foot of media allows for greater oil drop coalescence. HD Q-PAC media has 132 ft2/ft3 surface area for oil droplets to contact. Other typical coalescing media have about 48 ft2/ft3 to 68 ft2/ft3.
- A more efficient first step separation reduces the need for a second polishing step. HD Q-PAC media removes 99.9% of oil droplets 20 microns in size and larger. This meets EPA Method 1664 Revision A and European Standard EN 858-1.
- An open design eliminates trapping of particles and subsequent clogging of water channels. Oil water separators with HD Q-PAC media require fewer maintenance shut-downs and separates oil and water faster.
- Where higher-than-normal operating temperatures are required, HD Q-PAC media outperforms its competitors. HD Q-PAC media works effectively in temperatures up to 212°F, versus a maximum temperature of about 120°F for competing media.
Size/ mm |
Surface area/ ft2/ft3 |
Drip Points/ | Bulk Density/ Kg/m3 |
Smallest Grid Opening/ | Void ratio/ % |
305*305*305 mm | 132 | 75000/ft3 | 7.5 lb/ft3 | 0.16"*0.16" | 87.8 % |
40*40*40 mm | 612 m2/m3 | No data | 170 Kg/m3 | 0.07"*0.07" | No data |
1:Pre-purchase service
Fully understand customer's requirement, and give our professional opinion to help them.
2:User Training
Owing to our product has many different type, so it has many different installation way. For each type product, we must let you know its basically installation way. If necessary, issue one installation manual to them.
About US
1: Are you a manufacture or trader?
We are a professional manufacturer over 20 years
2: Do you participate in Exhibition?
Yes, Such Achema, Chemical Technology Equipment Expo, ECEE and so on
3:Where is your company? And visit?
Located in Anyuan Industry Park, Pingxiang City, Jiangxi Province.Welcome you to visit
4:Payment way
For oversea market, 30% advanced payment and 70% against copy of B/L or negotiation with you
5: After sales service
Please watch our related description
6:How long does it take to receive a reply after sending an inquiry?
24 hours. For busy, 48 hours.
7:Working time
A.M 8:00-P.M.5:00. However, for any question from internet, telephone,wechat and so on, answer you immediately.
8:Third-party test?
We have our owned testing center. If you need third-party testing, we will contact with them to do it.
9: QC
Pre-sales: Material test, adopt Olympus spectrometer,material test report, third party test(necessary)
In-sales: test product material, weight, size, bulk number,pressure,Temperature resistance
After-sales:
Providing professional installation guidance and on-site guidance if necessary
If any problem, offer suitable opinion to solve.
About product
1:customized and logo?
Yes, we can do it
2:Package
Small plastic woven bag, super sack, cartons or upon your requirement
3:Certification
If necessary, we will entrust third-party to do it
4: MOQ
1 cubic meter
5:Production time
5-7 days to meet one 20 FCL container loading requirement
6:How much is the proofing fee? How long does the sample come out?
If only need 3D proofing, 5-7 days will finish after confirming drawing. If only need injected sample, 30-40 days will finish after confirming mold
7:HS code
Common customs codes is 3926909090,8419909000,6903200000,8419909000 and so on.