| CAS No.: | 9003-07-0 |
|---|---|
| Formula: | Polypropylene |
| EINECS: | 200-815-3 |
| Material: | Plastic |
| Structure Feature: | Cylindrical Hollow Body |
| Type: | Random Packing |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Common random packing Plastic pall ring:
Plastic Pall ring birth is aim to overcome Raschig rings wall flow, Internal channels are not easy to wet,Long gas return path and so on. Since birth, Plastic Pall ring was recognized the common random packing in mass transfer field. Widely apply in absorption, scrubbing and stripping field.Under the same operation condition, Plastic Pall ring's air velocity flux is 50% larger than the Raschig ring, and mass transfer efficiency is 30% higher.
By minimizing the number of contours and crevices that can cause liquid hold-up and potential entertainment, Plastic Pall ring's opened cylinder walls and inward bent protrusions allow greater capacity and lower pressure drop than standard cylindrical rings.
Feature:
1:Hold-up and Two-phase Contact
1.1:Promotes highly efficient two-phase contact and distribution;
1.2:A relatively high liquid hold-up promotes high absorption efficiencies, especially in cases where the reaction rates are slow;
1.3 Uninterrupted and consistent passages for gas and liquid flow.
2:Versatility
2.1:Open, cross-linked design provides a highly efficient used of the ring's surface area;
2.2:Robust to variations in liquid and vapour distribution.
3:Mechanical Strength
3.1:Its internal cross-structure of diametrical spars make it mechanically robust and suitable for use in deep packed beds.
| D×H×δ mm |
Specific area m2/m3 |
Void rate % |
Bulk number Pieces/m³ |
Package density Kg/m³ |
F factor m-1 |
| 16×16×1 | 188 | 0.91 | 170000 | 141 | 275 |
| 25×25×1.2 | 175 | 0.90 | 53500 | 82 | 239 |
| 38×38×1.4 | 115 | 0.89 | 15800 | 54 | 220 |
| 50×50×1.5 | 93 | 0.90 | 6500 | 56 | 127 |
| 76×76×2.6 | 73.2 | 0.92 | 1927 | 58 | 94 |
| 100×100×3.0 | 52.8 | 0.94 | 1000 | 50 | 82 |
Packaging:
1: Round type Super sack(1000*1000*1000 mm) on Fumigation Pallet
20 super sacks is equal to one 20 GP container loading quantity
2: 100L Plastic Woven bag
10 bags is equal to one cubic meter
3: Cartons on Fumigation pallet
8 cartons is equal to one cubic meter
If you have any other requirement, do it on your requirement.
Shipping:
Once achieved Purchase with us, we will let you know our production Production plan and schedule.In case of delayed shipment, We will notify customers three days in advance.
Installation
1:According to the tower equipment diagram,and make sure that packing installation heights is correct.
2:When installing, it should always be poured from a certain height away from the packing layer. People should not stand directly on the packing to prevent the packing from deformation and uneven density. Wooden boards can be laid on the packing to disperse the force.
3:Other sundries, packaging bags, etc. is forbidden during the installation
4:Generally filled by random packing
5:After finished, if there is unevenness, use a wooden strip to naturally push it flat
FXSINO:
Founded in Pingxiang City of Jiangxi Province in 1998, mainly engaged in the design and manufacture of tower internals, packing, tower trays and the process of energy saving. Mainly develop the production, test and engineering service of mass transfer and separation in Chemical, Petrochemical, Refinery, Fertilizer, Oil & Gas and Environmental Protection areas.
With many years of technological development and production innovation, FXSINO has a very complete production equipment and strength. Widely cooperation with domestic famous Research institute & Multinational Group let FXSINO gain an unprecedented leap in the filed of production application recently.We provide our clients the best priced tower packing, trays and tower internals with good quality, practical utility and high - efficiency. Meanwhile, positively assist our customer resolve some questions which happened in project design, equipment commission, later maintenance& replacement etc.
About US
1: Are you a manufacture or trader?
We are a professional manufacturer over 20 years
2: Do you participate in Exhibition?
Yes, Such Achema, Chemical Technology Equipment Expo, ECEE and so on
3:Where is your company? And visit?
Located in Anyuan Industry Park, Pingxiang City, Jiangxi Province.Welcome you to visit
4:Payment way
For oversea market, 30% advanced payment and 70% against copy of B/L or negotiation with you
5: After sales service
Please watch our related description
6:How long does it take to receive a reply after sending an inquiry?
24 hours. For busy, 48 hours.
7:Working time
A.M 8:00-P.M.5:00. However, for any question from internet, telephone,wechat and so on, answer you immediately.
8:Third-party test?
We have our owned testing center. If you need third-party testing, we will contact with them to do it.
9: QC
Pre-sales: Material test, adopt Olympus spectrometer,material test report, third party test(necessary)
In-sales: test product material, weight, size, bulk number,pressure,Temperature resistance
After-sales:
Providing professional installation guidance and on-site guidance if necessary
If any problem, offer suitable opinion to solve.
About product
1:customized and logo?
Yes, we can do it
2:Package
Small plastic woven bag, super sack, cartons or upon your requirement
3:Certification
If necessary, we will entrust third-party to do it
4: MOQ
1 cubic meter
5:Production time
5-7 days to meet one 20 FCL container loading requirement
6:How much is the proofing fee? How long does the sample come out?
If only need 3D proofing, 5-7 days will finish after confirming drawing. If only need injected sample, 30-40 days will finish after confirming mold
7:HS code
Common customs codes is 3926909090,8419909000,6903200000,8419909000 and so on.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}