Kappa Ring for Absorption Tower

• CAS No.: 9003-07-0
• Formula: Polypropylene
• EINECS: 200-815-3
• Material: Plastic
• Structure Feature: Saddle Ring Filler
• Type: Random Packing
• Model NO.: FXP-DB220423-A1
• Usage: Chemical Engineering, Chemical Industry Product, Sewage Treatment, Upon Your Requirement
• Effect: Separation
• Source: No Description
• Transport Package: Small Bag, Super Sack, Carton and So on
• Specification: 25, 50, 76 mm
• Trademark: FXSINO
• Origin: China
• HS Code: 3926909090
• Production Capacity: 3000 Cbm/Month

Product Description

 

Product Description

Kappa ring for absorption tower :
Plastic Beta ring was invented by Koch-glitsch. Based on the analysis of its structure, it has not only attract cascade mini ring's low aspect ratio's advantage, but also increase inner circle in the packing's middle position. Therefore, plastic Beta ring is an excellent tower packing
The wing rings are the most famous random packing. They are mainly used in absorption systems. Anyway they suit for any mass transfer between a liquid phase and a vapour phase.
This packing is easily installed in a column.
They consist of hollow cylinders which height is equal to their diameter and which sides has got openings with some reinforcement tongues inside.

Detailed Photos

Feature:
1:Lower pressure drop than pall rings and saddles
2:Structure allows solid to be easily flushed through the bed by the liquid
3:High, free volume passages,independent of orientation
4:Consisitent passages for gas and liquid flow
5:Height of the beta ring gives oval reduction in column height in new installation
6:Higher liquid hold-up,which promotes high-absorption efficiencies due to additional drip points
7:High vapour capacity
 

Product Parameters

Technical Parameter:

Technical Parameter
Product Name	Diameter	Void age Fraction	Bulk Weight
Beta Ring	25mm	94	53kg/m³ 3.3lb/ft³
Beta Ring	50mm	94	54kg/m³ 3.4lb/ft³
Beta Ring	76mm	96	38kg/m³ 2.4lb/ft³

Operating mode

The liquid phase flows on the random packing, when the vapour phase is coming up counter-current. The surface of the packing makes the mass transfer possible between the two phases.

Installation
In a column, the packing is laying on a support grid. In addition to the function of supporting the packing, the support grid distributes the vapour.
To warrant a good efficiency a liquid distributor must be installed on the top of the packing to distribute the liquid.
A liquid re-distributor may be required when the packing height exceeds about 5 meters .
A hold down grid may be installed to prevent the packing bed to lift in case of a wrong operation.

Certifications

 

 

 

Company Profile

Founded in Pingxiang City of Jiangxi Province in 1998, mainly engaged in the design and manufacture of tower internals, packing, tower trays and the process of energy saving. Mainly develop the production, test and engineering service of mass transfer and separation in Chemical, Petrochemical, Refinery, Fertilizer, Oil & Gas and Environmental Protection areas.
With many years of technological development and production innovation, FXSINO has a very complete production equipment and strength. Widely cooperation with domestic famous Research institute & Multinational Group let FXSINO gain an unprecedented leap in the filed of production application recently.We provide our clients the best priced tower packing, trays and tower internals with good quality, practical utility and high - efficiency. Meanwhile, positively assist our customer resolve some questions which happened in project design, equipment commission, later maintenance& replacement etc.


 

Our Advantages

Application

Typical Application:
1:Air and water coolers in the air seperation plants
2:Packing towers in the mining,petroleum,chemical and other industries
3:water-treatment plants