Mlm Storage Media

• After-sales Service: No Provided
• Warranty: No Data
• Customized: Customized
• Performance: Pressure Resistant, Temperature Resistant, Corrosion Resistant, Heat Exchanger and Storing
• Brand: Fxsino
• Certification: CE, ISO, RoHS, No Description
• Model NO.: FXC-DB221020-A1
• Style: Plate
• Material: Alumina
• Process: High Temperature Firing
• Sample: Free
• OEM: Available
• Function: Heat Exchanger Media
• Transport Package: Wooden Carton, Box and So on
• Specification: 305*305*102 mm
• Trademark: FXSINO
• Origin: China
• HS Code: 6909190000
• Production Capacity: 3000 Cbm/Month

Product Description

Product Description

MLM Storage media:
It is  the most efficient heat-recovery media for regenerative thermal oxidizers (RTOs). Widely apply in various configurations allowing units to be designed specifically to maximize thermal efficiency or resistance to plugging,or minimize bed height or pressure drop.


 

Detailed Photos

Structural features:

1:Each piece ceramic sheet top & bottom has cross-distributed ceramic support strip, as long as  two sheets connect to form "T" inner channel, this channel has not only provide big heat storage space, but also promote heat flow evenly-distribution.

2:When gas passing through "T" channel,once the particles block one channel, gas will flow into the other side channel. In some way, this movement model overcome uneven heating caused by channel blockage.It can effectively resist thermal stress

3:Owing to "T" type parallel-plate packing was posted by many ceramic sheets, according to your construction requirements, it is very easy to assemble your suitable size block. Meanwhile, when one block temperature is too high, the clay at two ceramic sheet posted position will automatically break instead of the whole blocks bursting and indirectly protect the integrity of the thermal storage layer.

Product Parameters

Chemical Analysis/:
 

Composition	Value(%)
Al2O3	20-26
SiO2	65-75
K2O+Na2O	<3
Fe2O3+TiO2	1-2
Others	<3

Physical Properties/

Index/	Unit/	Value/
Density/	(g/cm³)	2.2-2.5
Coe. Of heat expansion/	*10 -6 K-1(20-1000ºC)	<=6.5
Specific Heat/	J/Kg.k(20-1000 ºC)	950-1100
Thermal Conductivity/	20-1000ºC	1.8-2.2
Impact thermal resistance/	ºC	400
Soften temperature/	ºC	1200
Water absorption/	%	<=0.5
Strength Compressive/	Mpa	>=2
Chemical Resistance/	%	>=98

Specification:

Model/	Unit/	ATMLC-200	ATMLC-180	ATMLC-160	ATMLC-125
Specification	mm	305*305*102 & 102*102*102 mm
Surface area/	m2/m3	680	610	530	430
Bulk Density	Kg/m³	1060	980	870	800

 

 

Certifications

 

 

After Sales Service

FAQ

FAQ:
About US
1: Are you a manufacture or trader?
We are a professional manufacturer over 20 years
2: Do you participate in Exhibition?
Yes, Such Achema, Chemical Technology Equipment Expo, ECEE and so on
3:Where is your company? And visit?
Located in Anyuan Industry Park, Pingxiang City, Jiangxi Province.Welcome you to visit
4:Payment way
For oversea market, 30% advanced payment and 70% against copy of B/L or negotiation with you
5: After sales service
Please watch our related description
6:How long does it take to receive a reply after sending an inquiry?
24 hours. For busy, 48 hours.
7:Working time
A.M 8:00-P.M.5:00. However, for any question from internet, telephone,wechat and so on, answer you immediately.
8:Third-party test?
We have our owned testing center. If you need third-party testing, we will contact with them to do it.
9: QC
Pre-sales: Material test, adopt Olympus spectrometer,material test report, third party test(necessary)
In-sales: test product material, weight, size, bulk number,pressure,Temperature resistance
After-sales:
Providing professional installation guidance and on-site guidance if necessary
If any problem, offer suitable opinion to solve.

About product
1:customized and logo?
Yes, we can do it
2:Package
Small plastic woven bag, super sack, cartons or upon your requirement
3:Certification
If necessary, we will entrust third-party to do it
4: MOQ
1 cubic meter
5:Production time
5-7 days to meet one 20 FCL container loading requirement
6:How much is the proofing fee? How long does the sample come out?
If only need 3D proofing, 5-7 days will finish after confirming drawing. If only need injected sample, 30-40 days will finish after confirming mold
7:HS code
Common customs codes is 3926909090,8419909000,6903200000,8419909000 and so on.